General Wire RD-E-SL Basic Model "E" Rodrunner - Same as RD-E-SG, except with EL-CDC Sectional Cable Drive Coupler for "L" Connectors

Model "E" Rodrunner 6.5 HP Gasoline Powered Sectional Drain Cleaner for "L" Connectors without Cables, Rods or Cutters The Model "E" Rodrunner is ideal for clearing long runs up to 500 ft. down the line. It can be coupled to either 10 ft. sectional cables up to 14" lines or 5/16" municipal rods to clear lines up to 24" in diameter. It is driven by a powerful 6.5 hp (9.00 ft-lb) engine with an easily accessible throttle control on the handle. Drive speed is set at 100 to 200 rpm for municipal rods and 200 to 400 rpm for sectional cables. The "hot-shift" transmission lets you switch from forward to reverse without the need for a clutch. The long gear shift lever is within easy reach of the operator. And features like the 3/4" lifetime lubricated drive chain and safety slip clutch to protect cables and rods against excessive torque build-up means low maintenance. This unit does not include cables, rods or cutters Unit Includes: Engine: 6.5 hp Briggs and Stratton four cycle with throttle on handle. Transmission: Snow and Nabstedt reversing "hot-shift" transmission drives 3/4" lifetime lubricated roller chain. No clutch or throttle needed. Slip Clutch: Protects against excessive torque being applied to cable or rods. Easily adjustable. "L" Connector Sectional Cable Drive Coupler Tool Box Leather Gloves 10" Pneumatic Tires Weight: 185 lbs. (84 kg) Dimensions: 29" wide x 44" long x 40" high. (74 cm x 112 cm x 102 cm) Handle removable for easy storage. Speed Range: From 100 rpm to 200 rpm for municipal rods; 200 to 400 RPM for sectional cables. Coil Spring Sections: 1 1/4" x 10 ft. long with inner spring to handle torque better than hollow cables.