Häfele 372.27.357 Swing-Up Fitting, Free Space 1.8, For push to open applications without handles, Model D pto, Anthracite
Extremely powerful and versatile: the Free Space series can be used for a much wider range of applications – up to 80% of all flap applications
Extremely compact: modern design and Häfele engineered technology allow for more space inside a cabinet
| Model B pto, EF≈480-983 | Model C pto, EF≈856-1615 | Model D pto, EF≈1460-2276 | Model E pto, EF≈2086-3323 | |
|---|---|---|---|---|
| Cabinet height mm | Flap weight kg | Flap weight kg | Flap weight kg | Flap weight kg |
| 225 | 2.3–4.3 | 3.8–7.1 | 6.4–9.3 | 9.2–13.4 |
| 250 | 1.9–3.9 | 3.4–6.4 | 5.8–9.1 | 8.3–12.6 |
| 275 | 1.9–3.5 | 3.1–5.8 | 5.3–8.2 | 7.5–12.0 |
| 300 | 1.7–3.2 | 2.8–5.3 | 4.8–7.5 | 6.9–11.0 |
| 325 | 1.6–3.0 | 2.6–4.9 | 4.4–7.0 | 6.4–10.2 |
| 350 | 1.5–2.8 | 2.4–4.6 | 4.1–6.5 | 5.9–9.5 |
| 375 | 1.3–2.6 | 2.2–4.3 | 3.8–6.0 | 5.5–8.8 |
| 400 | 1.2–2.4 | 2.1–4.0 | 3.6–5.6 | 5.2–8.3 |
| 425 | 1.1–2.3 | 2.0–3.8 | 3.4–5.3 | 4.9–7.8 |
| 450 | 1.0–2.1 | 1.9–3.5 | 3.2–5.0 | 4.6–7.3 |
| 475 | 1.0–2.0 | 1.8–3.4 | 3.0–4.7 | 4.3–7.0 |
| 500 | 0.9–1.9 | 1.7–3.2 | 2.9–4.5 | 4.1–6.6 |
| 525 | 0.9–1.8 | 1.6–3.0 | 2.7–4.3 | 3.9–6.3 |
| 550 | 0.8–1.7 | 1.5–2.9 | 2.6–4.1 | 3.7–6.0 |
| 575 | 0.8–1.7 | 1.4–2.8 | 2.5–3.9 | 3.6–5.7 |
| 600 | 0.8–1.6 | 1.4–2.7 | 2.4–3.7 | 3.4–5.5 |
| 625 | 0.7–1.5 | 1.3–2.5 | 2.3–3.6 | 3.3–5.3 |
| 650 | 0.7–1.5 | 1.3–2.4 | 2.2–3.5 | 3.2–5.1 |
| Front panel thickness Y mm | 16 | 18 | 19 | 22 | 24 | 26 | 28 |
|---|---|---|---|---|---|---|---|
| Distance X mm (with cabinet top panel thickness K=16 mm) | 117 | 110 | 107 | 96 | 90 | 83 | 76 |
Important
Selecting the correct model depends on door height and then door weight which should also consider the weight of the handle. We recommend ordering the stronger fitting if in doubt.
The lever arms are spring loaded. There is a risk of injury and damage to the fitting! After mounting the arms, do not press them down in the open position until the counterweight of the door is mounted.
A Pozi Drive #2 bit is required for all screw installations and adjustment features, otherwise damage to the screw head is likely.
Be certain that Euro screws which attach the fittings to the side panels are completely tight, drawing the fitting tight against the side wall.
For tension adjustment feature, we recommend using a cordless driver as these screws are geared very low. Be sure to adjust both sides to the same tensioning position.
Specifications
| Area of application | For door heights up to 650 mm (26") |
|---|---|
| Material | Housing: Plastic,Lever arm and support lever: Steel |
| Color/finish | Lever arm: Nickel plated |
| Lid material | Wood, Aluminum frame |
| Flap type | one-piece |
| Opening angle | 90 ° or 107° |
| For cabinet width | ≤1,800 mm |
| For cabinet height | 225 – 650 mm |
| Installation depth | 63 mm |
| Installation Depth (inches) | 2 1/2" |
| Adjustment facility | Please use a Pozi Drive #2 bit for all screw installations and adjustments. Door opening angle can be adjusted to 90° or 107° degrees. |
| Installation | Fitting for screw fixing with pre-mounted Euro screw; Front panel without tools, with front fixing brackets for sliding onto lever arm |
| Installation reference | The fitting mounts to the side panels with a single pre-mounted Euro screw. The door mounts without tools and slides onto the mounting plates. |
| Order reference | For aluminum framed doors, order screws and collars set item #372.27.600 - see accessories. Minimum frame width is 45 mm (1 3/4"). |
| Supplied with | 2 Fittings (right/left)2 Mounting brackets with screws1 Free push catch1 Set mounting instructions and paper drilling template |
| Efficiency factor | 1460 – 2,276 |
| For lid weight | ≤9.3 kg, note sample measurements table and cabinet height |
| Colour/Finish cover | Housing: Anthracite, support lever: Nickel plated |
| Model | D pto |
Pricing
📍 104 Emerald St, Keene, NH 03431
✉️ Sales@PoshHaus.com
