SBB 600 Plus Dual Heat Exchanger Indirect Storage Tank 163 gal. 187875

Stiebel Eltron 187875 Model SBB 600 Plus Domestic Dual Heat Exchanger Hot Water Tank for Solar, Geothermal or Hydronic Applications; 162.9 Gallon Storage Capacity, 150 psi/10 bar Working Pressure

All Stiebel Eltron SBB/SB-E series tanks are made in our factories in Germany and Slovakia. They can be used in residential or commercial installations as indirectly-fired domestic hot water storage tanks in conjunction with any type of boiler, geothermal, or solar hot water application. The vessels and heat exchangers in SBB/SB-E tanks are made from heavy gauge steel. All surfaces in contact with domestic hot water receive a thick porcelain enamel coating after shot-peening to clean the steel surface. Up to three inches of urethane foam insulation ensures that hot water stays hot, and standby heat loss is minimized.

• Heavy gauge steel with porcelain enamel coating
• Superb quality results in long service life
• Fitted with one or two large heat exchangers
• Sacrificial anode rod
• Up to 3" R-21 urethane foam insulation for low standby heat loss
• Large clean out port for ease of maintenance

• Storage capacity: 162.9 gal
• Upper heat exchanger volume: 2.5 gal
• Lower heat exchanger volume: 3.5 gal
• Working pressure: 150 psi/10 bar
• Tested to pressure: 217 psi/15 bar
• Max. pressure of boiler loop: 150 psi/10 bar
• Max. temp. upper loop: 266°F
• Max. temp. lower loop: 266°F
• Surface area of heat exchanger, upper: 2945 in2
• Surface area of heat exchanger, lower: 3875 in2
• Height with insulation: 68-5/16"
• Width with insulation: 36-1/4"
• Thickness of insulation: 3-11/32"
• Tank weight empty: 544 lb
• Tank weight full: 1955 lb
• Standby losses in 24 hours: 10000 BTU/1.9 kWh