3D kitchen designer

How to use it

1. Enter the wall-to-wall width and depth. Switch to L-shaped and set a corner cut-out if your kitchen wraps, then Apply room.
2. Start from a quick layout (one-wall, galley, L + island) or tap standard base, wall and tall cabinets to place them.
3. Drag pieces to the walls; they snap to the grid and to each other. Double-click to rotate, select a piece to resize it.
4. Flip to 3D and wall elevations, try door styles, colors, countertops and hardware, then price it with real J&K, KCD or Cab-Tec cabinets below.

Standard cabinet sizes

The designer uses these nominal sizes. Change any piece to a custom size after you place it.

Type	Standard widths	Depth	Height
Base cabinets	9 to 36″, in 3″ steps	24″	34½″ (36″ with counter)
Drawer base	15, 18, 24, 30, 36″	24″	34½″
Sink base	30, 33, 36″	24″	34½″
Corner base	36″ lazy susan · 42–45″ blind corner	24″	34½″
Wall cabinets	9, 12, 15, 18, 24, 30, 33, 36, 42″	12″ (24″ over fridge)	30, 36 or 42″
Tall / pantry	18, 24, 30, 36″	24″	84, 90 or 96″
Island	any; 36″+ deep is typical, 42″+ with seating	varies	36″ (42″ raised bar)
Filler strips	3″ and 6″	-	-

Linear feet

Add up the widths of your base cabinets and divide by twelve: that is your base linear feet. Do the same for wall cabinets. Cabinet lines are usually compared per linear foot within a door style, so the designer totals both for you.

Common questions

Is it free?

Yes. The 3D kitchen designer is free, with no sign-up.

Does it save my design?

It saves in your browser as you go. Use Save file or Download PDF to keep a copy or open it on another computer.

Can I see my kitchen in 3D?

Yes. Switch to 3D view to orbit the space, or to Wall elevations to see each wall, and try paint, floors, cabinet colors and countertops.